Gravity sensor function : When the gravity acceleration starts, the machine will automatically save the video when the accident occurred was not delete the file.Gravity sensor can be adjusted in the menu high - medium - low, medium factory default.
File locking feature :The imaging process, the M key is pressed, the machine will not delete the current video is saved as a file.
Parking guard function : Parking guards opened, when the vehicle stalled, tachograph into the automatic shutdown procedures, body if you receive external vibration generated by the tachograph will open the camera, automatically shut down after a record 10-15 seconds; when the body is detected again after the shock, again start camera function.
Parking for guarding video camera 1080P 30 frames / sec, and the file is automatically locked.
(Note: The parking guard function must only work in the case of tachograph automatic shutdown, manual startup or shutdown, the parking guard does not work.)
Motion detection function : If the motion detection after a short press OK to start recording 10 seconds after the camera automatically switches to standby mode motion detection , motion detection standby mode, the upper left corner of the screen there is a flashing yellow dots, when an object is detected when moving, the recorder start recording, the yellow flashing light spot becomes red spot; motion detection start time of 10-30 seconds after the end of the motion detection motion detection machine automatically enters standby mode, the upper left corner of the screen to switch to the yellow dot flashes; when once again detects moving objects, the camera function starts again !
USB mode : Connect the USB cable to the computer, tachograph will automatically eject the USB menu will appear the following options: Memory. In this mode, the video file can be accessed , or photo files.
Camera. Select this mode will bring up the USB video device, can be real-time network camera or video chat as a PC camera.
The battery instructions : After switching on the car power, the red charging indicator lights up in charge of the process, the whole charging time is approximately 180 minutes, the red charging indicator light will automatically turn off after charging is completed.
(Note:This equipment is to follow cars with state work long hours, stopping only for the built-in battery shutdown to save the file and design, finite length solid battery life, in daily use, please link to the vehicle power supply. )
Reset : If during use, the machine abnormal or crash situation, you can press the RESET button to reset the machine operating system shell through the hole touch through tiny needles.